3D Jewelry Designer

Glossary

The manufacturing and 3D terms behind a weight, a quote or a file format, defined once.

  • 3DM file: the Rhino format in jewelry CAD

    A 3DM file is Rhino's native format, which MatrixGold saves too. What it holds, how it differs from STL and GLB, and how to open one without Rhino.

    1 min readformats, cad

  • Bezel setting in jewelry: the rim that holds a stone

    A bezel setting holds a gemstone in a wall of metal pushed over its edge. How full and half bezels work, what they protect and what they give up.

    1 min readcad, ring-builder

  • Diamond brilliance: what it is and how cut affects it

    Diamond brilliance is the white light a polished stone returns to the eye. How cut creates it, how it differs from fire, and how a 3D render shows it.

    1 min readdiamonds, materials

  • Casting loss in jewelry manufacturing

    Casting loss is the metal that never reaches the finished piece: sprues, flashing and polishing. It is why a cast ring weighs less than the metal poured.

    1 min readweight, cad

  • Channel setting in jewelry

    A channel setting holds a row of stones between two walls of metal, with no prongs. It is common on wedding bands, eternity bands and ring shoulders.

    1 min readring-builder, cad, diamonds

  • Dispersion (fire) in diamonds and gemstones

    Dispersion is how a gem splits white light into spectral colours, and fire is the flashes of colour you see. How it is measured and how it renders in 3D.

    1 min readdiamonds, materials

  • Ring gallery: the metalwork under the stone

    A ring's gallery is the metalwork below the stone, seen from the side. It supports the prongs, sets how high the stone sits and carries side detail.

    1 min readring-builder, cad

  • glTF and GLB: the 3D file format for the web and AR

    glTF is an open 3D format made for the web and AR, and GLB is the same format in one binary file. What each holds and when to use which.

    1 min readformats, exports

  • Hallmark and fineness: what 585, 750 and 925 mean

    Fineness is the share of precious metal in an alloy, in parts per thousand. A hallmark states it on the piece: 585 on 14K gold, 750 on 18K, 925 on sterling.

    1 min readmaterials, pricing, weight

  • Halo setting in jewelry design

    A halo setting frames the centre stone with a border of small accent stones. How a halo is built, what it adds to a quote, and how it looks in 3D.

    1 min readdiamonds, ring-builder, materials

  • Gold karat: what 10K, 14K, 18K and 24K mean

    Karat measures gold purity in 24ths. The fineness of 9K to 24K gold, and how karat changes a ring's colour, weight and gold price.

    1 min readmaterials, weight, pricing

  • Lost-wax casting in jewelry making

    Lost-wax casting turns a wax or 3D printed resin pattern into metal: the pattern is invested, burned out, and molten metal fills the hollow it leaves.

    1 min readcad, weight

  • Metal density in jewelry: why the alloy matters

    Metal density turns a ring's volume into grams. It depends on the alloy as well as the karat: 14K white gold is 12.61 g/cm³ with nickel, 14.11 with palladium.

    1 min readweight, materials

  • Pavé setting in jewelry

    A pavé setting covers metal with small stones set close together, held by tiny beads. How it is set, and what it changes in a 3D model.

    1 min readdiamonds, cad, weight

  • Prong setting in jewelry: how claws hold a stone

    A prong setting holds a stone with small metal claws over its edge. How prong count and tip shape change a ring, and how a CAD file's prongs are detected.

    1 min readdiamonds, ring-builder, cad

  • Refractive index: how diamonds and gems bend light

    Refractive index measures how strongly a gemstone bends light. What diamond's index of about 2.42 does for brilliance, and how a 3D render uses it.

    1 min readdiamonds, materials

  • Ring size: what US, UK and EU sizes measure

    A ring size describes the inside of the band. US sizes step along the inner diameter, EU sizes are the inner circumference in mm, and UK sizes are letters.

    1 min readtry-on, ring-builder

  • Ring shank: the band of a ring

    The shank is the band of a ring, the part that circles the finger. It sets the ring size, comfort and metal weight, and it is where a ring is resized.

    1 min readring-builder, cad

  • Sprue in jewelry casting

    A sprue is the channel that feeds molten metal into a casting mould. The metal that sets in it is cut off, so it is poured but never part of the piece.

    1 min readcad, weight

  • STL file in jewelry 3D printing and casting

    An STL file is a 3D model saved as bare triangles, with no units, parts or materials. It is the usual file for 3D printing a casting pattern.

    1 min readformats, cad

  • USDZ file: AR Quick Look on iPhone and iPad

    A USDZ file packs a 3D model and its textures into one archive that iPhone and iPad open in AR Quick Look. What it holds and how it compares with GLB.

    1 min readformats, exports, try-on