3D Jewelry Designer

Gems, metals and two-tone finishes

Pick a gemstone or metal preset from the right-side tools and it applies to the whole piece, including a ring open in the Ring Builder. The metal library also includes 22K and 21K gold, palladium, titanium, steel and tungsten, plus ceramic and pearl finishes; enamel, opaque stones, coral and cord are in the Specialty panel. Quick materials gives a one-tap shortcut to common gems and metals, Selective materials recolors a single part, and a published Setting metal or Accent stones dimension lets the head differ from the band.

3D Jewelry Designer3 min read

Presets apply to the whole piece

Pick a gemstone or metal preset from the right-side tools; it applies to the whole piece, including a ring open in the Ring Builder (the price and SKU use the closest option your admin has published). The metal library also includes 22K and 21K yellow gold, palladium 950, titanium, stainless steel 316L and tungsten carbide, plus ceramic (white/black glazed) and pearl (white, cream, pink, Tahitian black) finishes.

Specialty materials

The Specialty panel (palette icon, in the Playground on plans with the Playground materials) holds the finishes that are neither metal nor gem: enamel (white, black, red, blue, green), opaque stones (black onyx, turquoise, lapis lazuli, malachite, green jade, grey agate, black bead), coral and shell (red coral, mother-of-pearl) and cord (black or brown leather, red silk). Pick a part, then a finish. These parts are left out of the metal weight.

Pearls are found for you

When you upload a piece, a part named as a pearl (for example "Akoya pearl" or "moti"), or a smooth, round part that is not a metal or a cut stone, gets a pearl finish. On a plan without the pearl materials it is shown in a soft white metal instead, and a short note tells you where the pearl finishes are. You can change it like any other part.

Quick materials

Quick materials (sliders icon above the bottom bar): tap it for a one-tap shortcut to common gems and metals, with a Gems / Metals toggle. While the ring builder is open it steps aside: use the builder's own Metal and Gem steps there, which offer every metal your admin has published rather than just the common three.

Two-tone metal and accent stones

When your admin has published a Setting metal or Accent stones dimension, the ring builder (in the studio and in an embed) shows an extra step for each, so the band keeps the main Metal while the head (and the pave) can be a different one. Every such picker starts on Match, which means "inherit the main choice", so a plain single-metal ring is unchanged and the shopper can always go back to it. A part that differs is priced as an upcharge on top of the base metal, on its own line in the breakdown, never charged twice. With cost-based pricing on, the metal and the accent stones are priced from their measured weight instead; see Weight, stones and cost-based pricing.

On an uploaded ring, the Metals panel shows Apply to: Whole ring / Band / Setting and the Gems panel All stones / Accent stones, once the studio has found those parts (see Ring parts in Get started). Pick Band or Setting, then a metal, for a two-tone ring. Choosing a metal for the Whole ring makes it one metal again.

Auto-detect colors

By default Auto-detect colors is on, so each part keeps its detected metal/gem color. Turn it off (top of the Gems/Metals panel) to force the studio look (Gold Polished + Diamond White 1) instead.

Selective materials

Selective materials (bottom bar): turn it on, then click a single part to recolor just that part. It works on an uploaded piece and on a ring from the ring builder. Parts you add with Shift-click in the Scene Outliner all take the colour.

To pick several parts on the model itself, hold Ctrl (⌘ on a Mac) and click each one: stones, band, head, prongs or any other part. Every selected part is outlined, and Ctrl-click on a selected part takes it out again. A plain click goes back to just that one part.

Related

  • Background, lighting and ground

    Set the backdrop, the HDR environment that lights gems and metals, the ground shadow or reflection, and the advanced render controls.

  • How to render diamonds realistically

    A diamond render looks real when the stone refracts at diamond's index, light bounces inside it, dispersion adds fire and the lighting has contrast.

  • Playground: pro designer tools

    The same studio with the professional pillars unlocked: scene outliner, lighting rig, material lab, measurement and pro rendering.

Put your own design in the studio

Upload a file and see it rendered photoreal, ready to embed and, for a ring, to try on.